No Foundation Needed: The line installs on its own base, so rented or shared workshops need no civil works.
Heavy Deck Build: Two 11KW motors with 95mm shafts handle the deck gauge used in multi storey floors.
20 Forming Stations: Three ribs and the side lap are built step by step, keeping the section accurate.
Drawing Lengths: Panels are cut to the length shown on the floor drawing.
Relocatable: The line can be moved to another bay later without breaking out a foundation.
Mainstream Profile: The 750 deck with three ribs at 51mm is the most common type produced in this range.
Low Offcut: A 1000mm coil yields a 750mm deck, keeping material waste small.
| Component | Specification |
|---|---|
| Machine type | Foundation free floor deck roll forming machine |
| Deck profile | 750 type, 3 ribs |
| Effective width | 750 mm |
| Rib height | 51 mm |
| Feed width | 1000 mm |
| Forming rows | 20 |
| Frame | 450H |
| Shafts | 95 mm |
| Main motor | 2 x 11 KW |
| Chain drive | 2 inch |
| Foundation | Not required, the line installs without civil works |
| Sheet thickness | [To be confirmed] |
| Middle plate | [To be confirmed] |
| Cutting | [To be confirmed] |
| Control system | [To be confirmed] |
| Line length | [To be confirmed] |
Install Anywhere: No concrete foundation means a rented bay can take the line without civil works.
Move It Later: The line can be lifted to another site when the lease ends.
Heavy Duty Drive: Dual 11KW motors and 95mm shafts carry thick deck coil.
Stable Section: A 450H frame holds the three rib profile on long runs.
Clean Ribs: 20 stations form the ribs and side lap without marking the steel.
Low Waste: A 1000mm coil produces a 750mm deck.
Mainstream Deck: The 750 type is the profile this range produces most often.
